MFG-CV01-P01 | Source and format-part briefing
Concept training procedure draft · D1 · 29 October 2026
For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.
Equipment: MFG-CV01
Model: 1.0.0-concept
Source basis: Original authored concept; no approved customer/OEM SOP supplied.

01. Confirm equipment and task identity.
Evidence: MFG-CV01 · Conveyor changeover rig. Record draft D1 and model 1.0.0-concept.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

02. Confirm the inert training boundary.
Evidence: For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

03. Read FMT-A → FMT-B in the task brief.
Evidence: Record the requested target format; do not infer it from bottle appearance.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

04. Locate RAIL-L, RAIL-R and HW-01.
Evidence: Use the model picker and identify the coupled guide concept.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

05. Locate GB-A1 r1 on the comparison rack.
Evidence: Record that it belongs to Format A in this authored concept.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

06. Compare GB-B2 r2 with GB-B1 r1.
Evidence: Preserve both identifiers and revisions; shape similarity is insufficient.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

07. Review the concept applicability table.
Evidence: FMT-B maps to GB-B2 r2; this is an authored training rule awaiting an approved source.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

08. Select GB-B1 r1 as a deliberate wrong choice in practice.
Evidence: The practice must enter HOLD before continuing.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

09. Use the source check to recover to GB-B2 r2.
Evidence: Keep the initial error and the correction in the local attempt record.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

10. List the missing operating inputs.
Evidence: No approved SOP, pin tolerance, guide setting or first-piece criterion is supplied.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

11. Prepare the evidence record.
Evidence: Record observations, source revisions, holds, recovery and missing physical evidence; do not invent a result.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

12. Request qualified review before reuse.
Evidence: Keep this draft unapproved until the task owner accepts the sources, geometry, criteria, permissions and revision.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.