MFG-EL01-P02 | Component identity and layout rehearsal
Concept training procedure draft · D1 · 29 October 2026
For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.
Equipment: MFG-EL01
Model: 1.0.0-concept
Source basis: Original authored concept; no approved customer/OEM SOP supplied.

01. Confirm equipment and task identity.
Evidence: MFG-EL01 · Control-cabinet revision trainer. Record draft D1 and model 1.0.0-concept.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

02. Confirm the inert training boundary.
Evidence: For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

03. Select PLC-01 in the named component picker.
Evidence: Observe its position, not a real controller configuration.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

04. Locate PSU-01 separately.
Evidence: No electrical connection or rating is asserted.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

05. Locate RELAY-01 and the terminal props.
Evidence: Use the exact model identifiers in the training record.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

06. Use the exploded layout to inspect mounting relationships.
Evidence: Exploded layout is not a disassembly sequence.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

07. Inspect DOOR-01 as a detached demonstration part.
Evidence: No door opening procedure or interlock is simulated.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

08. Reassemble the illustration.
Evidence: No actual inspection has occurred.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

09. Compare a proposed replacement identifier with a source request.
Evidence: Unknown applicability means HOLD, not substitution.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

10. Prepare the revision questions for engineering.
Evidence: Request accepted device list, drawing and change record.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

11. Prepare the evidence record.
Evidence: Record observations, source revisions, holds, recovery and missing physical evidence; do not invent a result.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

12. Request qualified review before reuse.
Evidence: Keep this draft unapproved until the task owner accepts the sources, geometry, criteria, permissions and revision.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.