MFG-PN01-P01 | Circuit and source familiarisation
Concept training procedure draft · D1 · 29 October 2026
For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.
Equipment: MFG-PN01
Model: 1.0.0-concept
Source basis: Original authored concept; no approved customer/OEM SOP supplied.

01. Confirm equipment and task identity.
Evidence: MFG-PN01 · Pneumatic fault-learning panel. Record draft D1 and model 1.0.0-concept.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

02. Confirm the inert training boundary.
Evidence: For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

03. Identify PANEL-01 and its training tag.
Evidence: The panel is an unpressurised concept.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

04. Locate INLET-01 and FILTER-01.
Evidence: No air supply is connected or represented as safe.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

05. Locate REG-01 and GAUGE-01.
Evidence: The gauge is a non-reading prop.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

06. Locate VALVE-01, CYL-01 and ROD-01.
Evidence: Record component identities without inferring a validated circuit.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

07. Trace the visible line segments.
Evidence: The schematic relationship requires the approved circuit drawing.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

08. List stored-energy questions.
Evidence: A model cannot verify depressurisation or isolation.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

09. Request device and drawing revisions.
Evidence: The physical asset must match the permitted source.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

10. Hold any real intervention.
Evidence: No pressurised work or actuation is authorised.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

11. Prepare the evidence record.
Evidence: Record observations, source revisions, holds, recovery and missing physical evidence; do not invent a result.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.

12. Request qualified review before reuse.
Evidence: Keep this draft unapproved until the task owner accepts the sources, geometry, criteria, permissions and revision.
HOLD if: Identity, source applicability or required evidence is missing or inconsistent.