Exception response and recovery review

Read the draft before the model.

12 authored steps

A sequence with visible evidence gates.

1. Confirm equipment and task identity.

   MFG-PN01 · Pneumatic fault-learning panel. Record draft D1 and model 1.0.0-concept.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

2. Confirm the inert training boundary.

   For the inert browser model only. Not an approved operating SOP. No physical work, production release or certification is authorised.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

3. Compare a hypothetical device label with the circuit source.

   A mismatch is recorded as an exception.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

4. Stop the proposed instruction.

   Do not continue using a different device procedure.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

5. Record missing energy-state evidence.

   No zero-energy conclusion can be drawn from the web page.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

6. Ask the source owner for the matching circuit revision.

   Resolve applicability before any operating instruction.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

7. Keep the original symptom record.

   Recovery must not erase the initial uncertainty.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

8. Review the proposed explanation with a qualified expert.

   The training draft can capture reasoning, not a released diagnosis.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

9. Version any approved learning change.

   Preserve permission and reviewer identity outside this public concept.

   Hold if: Identity, source applicability or required evidence is missing or inconsistent.

10. Keep physical work authority separate.

    No automated restart, pressure change or field intervention occurs.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

11. Prepare the evidence record.

    Record observations, source revisions, holds, recovery and missing physical evidence; do not invent a result.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

12. Request qualified review before reuse.

    Keep this draft unapproved until the task owner accepts the sources, geometry, criteria, permissions and revision.

    Hold if: Identity, source applicability or required evidence is missing or inconsistent.

Keep the equipment and source together.

Referenced components: INLET-01, FILTER-01, REG-01, GAUGE-01, VALVE-01, CYL-01, ROD-01.

Required operating inputs: Approved circuit drawing; device identifiers; stored-energy controls; permitted training setup and fault cases.